Atag MC4111EUU/A03 Notice D'utilisation page 100

5 Operation
5.3 Oven functions
1. Press the on/off button to activate the microwave
function.
'01:00' is blinking in the display and the microwave icon
appears in the display.
2. Turn the function knob one position to the right.
The hot air icon is blinking. Time, temperature and the
oven icon are shown in the display.
3. Turn the selection knob to the right to choose a mode
(see the table on page 97). If the symbols stops blinking,
the chosen mode has been activated. You can go back
one step by turning the function knob one position to the
left.
4. You can adjust the time and/or the temperature in every
mode (grill; setting 1, 2 or 3, 3 is the highest setting). Press
the clock button or the temperature/automenu button.
The time or temperature (grill setting 1, 2 or 3) is blinking.
By turning the selection knob you can set the preferred time and/or temperature
(grill setting). To confi rm the setting, press the clock button or the temperature/
automenu button again.
The time and temperature that can be set depends on the mode that you have
chosen.
5. Press the start/pause button to start the cooking process.
When the cooking process is ready, you will hear 5 beeps. The fan continues to
operate for some time and then stops automatically.
If you do not press the start/pause button, the combi microwave oven switches itself off
automatically after 15 minutes.
100