Abus ESMO50001 Instructions D'installation Et D'utilisation page 23

Functional principle and features
Functional principle and features
General
The mobile communication module (ESMO50001) is an optional accessory module for
the Secvest radio alarm system or Secoris alarm system. This product needs to be
installed by a specialist company.
Important
It enables communication via the GSM and LTE mobile phone network with stationary
and mobile telephone connections. In addition, it enables SMS messages to be sent and
DTMF/FSK and IP-based control centre protocols and IP-based communication (e.g. e-
mails) to be transmitted.
The module is installed on the inside of the alarm panel. The motherboard includes a
plug connector designed for this purpose. The antenna cable is connected directly to the
module. The module can be operated using an external antenna, or an antenna
integrated into the circuit board. The switching is carried out in the "Installation menu" →
"System" → "Hardware" → "Mobile antenna" (internal/external)
•
Before you begin the installation, please check whether the selected
service provider and installation location of the alarm system, as well
as the potential position of the antenna, are suitable for GSM and LTE
Note
transmission.
•
In principle, we recommend the use of contract cards in order to ensure
a secure transmission. Prepaid cards will not work without sufficient
credit.
• The external antenna must be installed outside of the alarm panel. It
also helps to improve low GSM and LTE signal levels. As the module
At least S/W V3.01.21 or higher must be installed on the
FUAA50XXX.
23