Mobile Workbench Use Requirements; Assembly Instructions - Whirlpool GLADIATOR GAMT41HWJG Instructions D'assemblage

MOBILE WORKBENCH USE REQUIREMENTS

Intended for garage use in a dry location.
■
Use caster locks when not being moved.
■
Maximum weight limit is 100 lbs (45 kg) for each drawer.
■
Maximum weight limit for mobile workbench is
■
1500 lbs (682 kg).
TOOLS AND PARTS
Gather the required tools and parts before starting assembly.
■
Parts are located inside tool cabinet.
TOOLS NEEDED
Double-sided 10 mm / 12 mm wrench (included)
■
Philips screwdriver
■
Hex key
■
PARTS SUPPLIED
Mobile workbench
■
Cord storage hook (2)
■
Cabinet handle
■
Fixed casters (2)
■
Swivel casters (2)
■
Drawer and tray liners (9)
■
Keys (2)
■
Bumpers (4)
■
F1 - M6 – 1.00 x 15 hex bolt (4)
■
F2 - M8 – 1.25 x 25 hex bolt (16)
■
F3 – M6 – 1.00 x 12 pan-head Philips screw (4)
■
F4 - 6 mm washer (8)
■
F5 - M6 hex-head bolt (8)
■
F1
F2
4

ASSEMBLY INSTRUCTIONS

M6 – 1.00 x 15 hex bolt (4)
M8 – 1.25 x 25 hex bolt (16)
F3
F4
F5
UNPACK THE MOBILE
WORKBENCH
WARNING
Excessive Weight Hazard
Use two or more people to move and assemble
workbench.
Failure to do so can result in back or other injury.
Remove the packaging from the mobile workbench. Parts are
■
located inside the cabinet drawer. Verify contents.
See "Parts Supplied."
Set aside the outer cardboard package for use during
■
assembly.
After assembly, dispose of all packaging materials properly.
■
M6 – 1.00 x 12 pan-head
Philips screw (4)
6 mm washer (8)
M6 hex-head bolt (8)