Publicité
Les langues disponibles
Les langues disponibles
Maintenance
To change the brush roller (128) in XP 12 machines
push the button (122), remove the side plate (127),
turn the brush clockwise a quarter of a turn and pull
the brush roller out. Slide the new brush roller into the
brush housing and turn it until it locates into position.
Push the button (122) and press the side plate (127)
back into place.
We recommend vacuuming out the brush roller ends
periodically to prevent a build up of dust or fibre.
When cleaning hair, etc., from the brush roller, do not
127 128
122
cut into the bristles.
Underneath the machine is an inspection door to
check for blockages (144).
Blockages in the neck (20 - picture 2) can be checked
by first lifting off the dust bag housing by pressing the
catch (8). Then release the foot pedal, lower the neck
144
and check into the tube next to the pedal.
Blockages in the hose can cleared by taking the hose
off the machine and replacing It the wrong way round
In the connecting tube (26), holding it upright with
one hand blocking the top and switching on the
machine.
(If necessary quickly lift your hand on and off the end
of the hose).
The guarantee is invalidated if parts not approved
26
by manufacturer are fitted, eg. bags, filters, brush
4
roller, etc.
8.643-389.0 Manual - Trident Hillyard V12XP
11
Publicité
