Sunrise Medical Quickie Q700 R Manuel D'utilisation page 20

5.9 (Powered) seating options
The wheelchair can be equipped by the following mechanical and/or powered
options to adjust your seating position. These options can be operated by the user
without the use of tools.
Powered adjustable seating options (Fig. 5.5 - Fig. 5.7).
How to operate these powered seating options can be found in & Controller + &
Seating:
1. Powered anterior tilt function
2. Powered posterior tilt function
3. Powered seat elevator
4. Powered backrest recline
5. Powered elevating leg rests
The wheelchair may be equipped with a feature that allows the powerchair to be
driven up to 4.5kph/3mph when the seat is elevated, this feature is called C-Me. For
guidance with user weight limits and recommended chair configuration when using
C-Me, please refer to your Sunrise Medical authorized dealer. Note: User weight is
restricted to a maximum of 136kg in combination with the C-Me option.
DANGER!
• Use of the powered adjustable seating options may influence the stability of the
wheelchair.
• Only use the powered adjustable seating options when the wheelchair is on
a flat surface! Do Not attempt to operate any power seating option while
positioned on an incline.
• Please stay clear of any powered actuator while the component is in motion.
Sunrise power mechanisms move over large ranges of travel. Users should be
aware of their surroundings while components are in motion.
• While driving this seating system in the reclined, elevated, or tilted position use
caution.
• Do Not attempt to operate any power seating option while this seating system is
in motion.
• Do not attempt to operate the lift or tilt power seating options around children.
• Through programming it is possible to reverse the direction of all powered
seating functions, ensure you know which direction your seat is going to move
before operating.
• Please be aware that the lift/tilt modules present a trap hazard. Make sure that
during operation the lift/tilt modules are free from all clothing, hands, feet and
other extremities, to prevent injury.
• Do not drive on ramps or slopes with the seating in the elevated position. Before
attempting to climb or descend a slope, return the wheelchair to a standard
seated drive position, with the backrest upright.
• This power system is designed to automatically reduce the maximum driving
speed to a creep and/or C-Me mode when certain power seating limits are
reached. Depending on the configuration of the chair there might be multiple
creep and/or C-Me speeds.
• Before operating your chair in creep and/or C-Me mode, read all warnings and
guidelines related to this feature. They will help in understanding how to reduce
the risk of a fall or tip-over and how to identify environmental conditions that
could affect your safety when driving while the chair is in creep and/or C-Me
speed.
1. When driving indoors or outdoors, in creep mode, it should only be used on
flat, level, and hardscape surfaces.
2. Driving in creep mode should never be attempted on uneven terrain like:
gravel, grass, bumpy surfaces, uneven pavement, or hills.
3. NEVER raise the seat when the chair is being operated in the proximity of any
of the terrain types listed above, or on any uneven surface.
20
1000mm
Q700 M/M HD/F/R/UP-M/UP-F | Rev. J | English
Fig. 5.5
Fig. 5.6
Fig. 5.7