Publicité
Les langues disponibles
Les langues disponibles
⚫
It is necessary to provide space for air to flow at the front and back of the toaster.
⚫
The toaster must not be located in the airflow path of the air conditioning system.
⚫
For safety reasons, the control knobs of the toaster and the power cord plug must always
be within reach.
⚫
Before installing the crumb tray or loading tray, the toaster must be disconnected from the
mains and allowed to cool.
⚫
The horizontal position of the toaster is controlled by the height-adjustable legs.
⚫
Before using the toaster, the crumb tray must be installed (see illustrations below).
A – Toast output device
B – Power cord
C – Crumb tray
D – Prepared toast tray
E – Loading tray
ELECTRICAL SAFETY DATA
⚫
The device is equipped with a 13-ampere fuse.
Replacing the fuse:
● Green and yellow wire – earth (E)
● Blue wire – neutral (N)
● Brown wire – live (L)
In case of difficulties, contact a qualified electrician.
⚫
The device must be grounded.
⚫
The plug of the power cord must reach the electrical outlet without using extension cords.
⚫
The power cord and plug must be protected from water.
DISPOSAL
This symbol means that as a manufacturer of
electrical toasters, we are subject to
the requirements of the EU Waste
Electrical and Electronic Equipment Directive.
⚫
This product must not be disposed of along with household waste.
⚫
In order to avoid damage to the environment or human health, the toaster must be
disposed of strictly in accordance with the established procedures.
⚫
The toaster can be returned to the supplier for environmentally friendly disposal.
EN
11
Publicité
