HURAKAN HKN-TOSTI18 Mode D'emploi page 10

EN
HELLO!
You have purchased professional equipment. Before you start using it, you must familiarize
yourself with this Manufacturer's Certificate, which should be kept for the entire service life of
the equipment.
Keep in mind that observing the instructions presented in this Manufacturer's Certificate
will allow you to extend the service life of the equipment and avoid injury to personnel.
We hope our recommendations will make the equipment operation as easy as possible.
TECHNICAL DATA
MODEL
DESCRIPTION
POWER CONSUMPTION
RATED VOLTAGE
CURRENT FREQUENCY
DIMENSIONS
SAFETY INSTRUCTIONS
ATTENTION!
Read this instruction manual carefully before using the toaster. During operation, the
instruction manual must be stored together with other instructions and manuals in a safe place
accessible to personnel. To avoid personal injury and equipment damage, all of the following
requirements and rules must be strictly adhered to.
⚫
Do not make any changes to the toaster design or structure.
⚫
Do not wash the toaster under running water or immerse it in water.
⚫
Before using the toaster for the first time, unpack it, remove the packaging materials and
protective films, and wash it thoroughly according to the cleaning instructions below.
PLACEMENT AND INSTALLATION
⚫
The mains supply voltage must comply with the requirements indicated on the toaster
nameplate.
⚫
The toaster must be installed on a flat horizontal surface capable of supporting its weight.
⚫
The toaster must not obstruct the passage of people or access to other equipment.
⚫
Do not use the toaster outdoors.
⚫
The surface on which the toaster is installed must be heat-resistant (e.g. stainless steel or
special heat-resistant plastic).
⚫
Personnel should be aware that the external surfaces of the toaster heat up during use.
⚫
The toaster must be installed in a well-ventilated room and protected from high
temperatures and contamination.
10
INTRODUCTION
HKN-TOSTI18
Conveyor toaster
1500 W
220–240 V
50-60 Hz
370х520х390 mm