Publicité
Les langues disponibles
Les langues disponibles
CONNECTING AND LINKING
Connectivity : HDMI Input, VGA + DP
1
1. RJ45 connector.
2. Switch button: Press to turn on and turn off.
3. Power supply 100-240V (50/60Hz), check the power according to the model : power cable with European
"F" type plug, length 1.5 m, 10 A, 1000 W.
Caution :
Only connect the terminal to the power supply if it is placed on a stable and dry floor, in an environment as
indicated in the technical description and there is no run-off either above the terminal, on the floor, along the
power cable passage or above the power supply wall socket.
Do not move an appliance connected to the power supply.
The terminal pole is a class A device, which means that it can cause radio interference effects in its environment
like any other device with a large LCD panel and a Wi-Fi transmission system. It is potentially sensitive to
interference from surrounding devices. In this case, please check other equipment installed nearby.
Do not place the Terminal in direct sunlight or near a heat source, as this may damage it.
2
Page 19 de 20
3
Publicité
