LEXIBOOK JG7430 02 Mode D'emploi page 16

6. Ventilation should not be impeded by covering the ventilation openings.
7. Only use accessories, which are specified by the manufacturer.
8. Use replacement parts, which are specified by the manufacturer.
9. Install the unit in accordance with the manufacturer's instructions.
10. Place the unit where there is good ventilation. Place the system on a flat, hard and stable surface.
Do not expose to temperatures above 40°C. Allow at least 10 cm clearance from the rear and the
top of the unit and 5 cm from each side.
11. Press the players buttons gently. Pressing them too hard can damage the player.
12. Dispose of used batteries in an environmental-responsible manner.
13. Always ensure that the product is unplugged from the electrical outlet before moving or cleaning.
Clean it with dry cloth only.
14. Turn off the product during lightning, storms or when it will not be used for long periods of time.
15. This product has no user-serviceable parts. Do not attempt to repair this product yourself. Only
qualified service personnel should perform servicing. Take the product to the electronics repair
shop of your choice for inspection and repair.
16. NEVER let anyone, especially children, push anything into holes, slots or any other openings in the
unit's casing as this could result in a fatal electric shock.
17. Don't mount this product on a wall or ceiling.
18. Do not place the unit near TVs, speakers and other objects that generate strong magnetic fields.
19. Do not leave the unit unattended when it is in use.
20. Keep minimum distances around the apparatus for sufficient ventilation.
21. The ventilation should not be impeded by covering the ventilation openings with items, such as
newspapers, table-cloths, curtains, etc.
22. The use of apparatus in moderate climates.
23. Batteries should be disposed of properly. Take them to the collection container in order to protect
the environment.
Connecting the console to a TV set
The "TV Games Console" must be plugged to a TV set.
Note: The TV set and the console MUST BE TURNED OFF.
1. Plug the AV cable (yellow end) into the matching video input jack on the TV set.
2. Plug the AV cable (white end) into the matching audio input jack on the TV set.
3. Plug the AV cable (red end) into the matching audio input jack on the TV set.
4. Plug the other end of the cable to the AV input located
at the back of your console 5 .
5. Please move the switch 4 towards the AV position.
6. Switch on the TV set and turn on the console.
Note: You can also use a HDMI cable (not included) to connect
the console to the TV set. Insert one end of the HDMI cable into
3
the console and the other end of the cable into the TV's
HDMI port. Please move the switch
Positioning the console in the play area:
- Place the console observing carefully the diagram
shown opposite.
- Ensure you have enough space and there are no
obstacles in the play area (furniture, overhead light,
carpet...)
- Place the console on a flat and steady table at about the same height as the television.
- Play directly in front of the television within a distance of 1 meter from the console.
Note: Do not use other controllers in the same room and during the game, it may occur abnormal function of the
console.
Note: In order to show the image transmitted by the main unit, you must set your television to the input jack being
used. Input selection button may be located differently upon TV manufacturer and labeled as: select, input, input
select, line, line in, source, in, EXT or AUX. Please refer to your TV's instruction manual for further information.
JG7430_02IM2480_327_V03.indb 16
4
to the 'HDMI' position.
16
27/11/2020 2:30 PM