Siemens MQ67 FQ 1 Serie Notice D'utilisation page 8

MQ67115_de-ar.book Seite 8 Mittwoch, 14. Januar 2015 7:13 07
en
Only our customer service may repair the appliance.
, Safety instructions for this appliance
Risk of injury
Electric shock risk
Do not use the hand blender with damp hands and do not operate it at no
load.
Do not immerse the appliance in liquid above the blender foot-base unit
connection point.
Never immerse the base unit in liquids and do not clean in the dishwasher.
Caution when processing hot liquids. Liquids may splash during
processing.
Never place blender foot on hot surfaces or use in very hot food. Leave hot
food to cool down to at least 80 °C before processing with the blender!
Operate the hand blender with original accessories only.
Do not attach or remove tools until the appliance is at a standstill.
Recommendation: Never switch on the appliance for longer as you need
to processing the ingredients.
Risk of injury from sharp blades/rotating drive!
Never grip the blade in the blender foot.
Never clean the blades with bare hands. Use a brush.
These operating instructions refer to various
models. An overview of the different models can
be found on the illustrated pages (Fig.
Overview
Please fold out the illustrated pages.

Fig.
1 Base unit
2 Power cord
3 Speed control
Operating speed can be adjusted steplessly

between the lowest (
speed (only in conjunction with button 4a).
4 ON button
a Controllable speed
(with speed control 3)
b Turbo speed
The hand blender remains switched on as
long as the On button (a or b) is pressed.
The turbo speed is used for the universal
cutter (if included in delivery).
5 Release buttons
To remove the blender foot, simultaneously
press both release buttons.
8
6 Blender foot

).
7 Blender blade
8 Blender jug
For some models:
9 Lid for blender jug
10 Whisk with gear
) and highest (12)
11 Masher attachment with gear
12 Universal cutter
13 Lid for universal cutter
If the universal cutter is not included with the
hand blender, it can be ordered from customer
service (order no. 657248).
With the universal cutter use the appliance at full
power to prepare honey spread (according to
the recipe). You can find the recipe in the
instructions for use of the universal cutter.
Plastic or metal (depending on model).
Attach the blender foot and lock into position.
Using the blender jug will prevent the
ingredients from splashing.
Place the lid on the blender jug to keep in the
processed ingredients.
Place the lid on the universal cutter to keep
in the processed ingredients.