CH-111018.1 & CH-111018.2
PARTS DESCRIPTION
1.
Air outlet
2.
Power switch (750W; 1250W; 2000W)
3.
Thermostat
4.
Air inlet
5.
Handle
6.
Feet
OPERATION OF THE HEATER
Note: When the heater is turned on for the first
time, or when it is turned on after a longer period of storage, it is normal that the heater may emit some
smell and fumes. This will disappear when the heater has been on a short while.
Set the thermostat to the minimal position and insert the plug to the power supply.
Turn on the power switch: 750W, 1250W, 2000W.
Turn the thermostat knob in a clockwise direction to the max position.
Once the room temperature has reached the desired value, turn the thermostat knob slowly in
anti-clockwise direction until you hear a "click" sound; this is the setting temperature.
The appliance will automatically maintain the setting temperature. It will switch on when the room
temperature is below the setting, and switch off if it is above the setting.
CLEANING THE HEATER
Always unplug the heater from the wall socket and allow it to cool down completely before cleaning. Clean
the outside of the heater by wiping with a damp cloth and with a dry cloth. Do not use any detergents or
abrasives and do not allow any water to penetrate the heater.
STORING THE HEATER
When the heater is not used for a long time it should be protected from dust and stored in a clean dry
place.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50-60Hz
Power consumption: 1800-2000W
Recycling – European Directive 2012/19/EU
This marking indicates that this product should not be disposed with other household wastes. To
prevent possible harm to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
All manuals and user guides at all-guides.com
- 59 -
GB