Télécharger Imprimer la page

Edesa EOE-5010 X Manuel D'instructions page 33

Publicité

Les langues disponibles

Les langues disponibles

TROUBLESHOOTING
You may solve the problems you may encounter with your product by
checking the following points before calling the technical service.
Check Points
In case you experience a problem about the oven, first check the table
below and try out the suggestions.
Problem
Oven does not operate.
Oven stops during cooking.
Turns off during cooking.
Outer surface of the oven gets very
hot during operation.
Oven door is not opening properly.
Internal light is dim or does not
operate.
Electric shock when touching the
oven.
Possible Cause
Power supply not available.
Plug comes out from the wall
socket.
Too long continuous operation.
Cooling fan not operating.
Oven not installed in a location
with good ventilation.
More than one plugs in a wall
socket.
Oven not installed in a location
with good ventilation.
Food residues jammed between
the door and internal cavity.
Foreign object covering the lamp
during cooking.
Lamp might be failed.
No proper grounding.
Ungrounded wall socket is used.
33
What to Do
Check for power supply.
Re-install the plug into wall socket.
Let the oven cool down after long
cooking cycles.
Listen the sound from the cooling
fan.
Make sure clearances specified in
operating instructions are maintained.
Use only one plug for each wall
socket.
Make sure clearances specified in
operating instructions are maintained.
Clean the oven well and try to
re-open the door.
Clean internal surface of the oven
and check again.
Replace with a lamp with same
specifications.
Make sure power supply is grounded
properly.

Publicité

loading