Publicité
Les langues disponibles
Les langues disponibles
USE
Sensitive touches
Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your
finger touches the key, the corresponding command is activated. This activation is validated by
a control light, a letter or a number in the display and/or a "beep" sound.
Touch only one key on the same time.
Display
Display
0
1...9
A
E
H
U
II
Residual heat indication
After the switch-off of the hob, the heating zone is still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zone may be touched safely.
When the residual heat indicator light is on, don't touch the heating zone and don't put any heat
sensitive object on them. There are risks of burn and fire!
"SLIDER" zone: to set power and timer values
Select the cooking zone. The display corresponding to the selected zone will be highlighted.
While the zone is activated (for a few seconds), you can adjust the power by sliding your finger
on the groove of the glass (Slider). Slide clockwise to increase the power level and
counterclockwise to decrease the power level.
To adjust the power of another cooking zone, wait until the previous zone is no longer activated
(the highlighted display becomes normal).
STARTING-UP AND APPLIANCE MANAGEMENT
Before using your new hob
Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent
which risks causing blue-tinted colour on the glass surface.
Designation
Zero
Power level
Heat accelerator
Error message
Residual heat
Keep warm
Pause
"slide"
Function
the heating zone is activated
Selection of the cooking level
automatic cooking
Electronic failure
the heating zone is hot
Maintain automatically of 70°C.
the hob is in pause
24
Publicité
