Publicité
Les langues disponibles
Les langues disponibles
4. Pull out the connector.
5. Remove fittings from main hose and pull out all the hose from the reel
6. Remove fittings from main hose: spray gun (8), connector (1), hose stop (3).
To insert a new hose, follow below steps
Insert new hose through the outlet window (4) and proceed with assembly following above steps in
reverse.
Once hose is securely fitted, FIRMLY HOLD THE HOSE, unlock the drum and then rewind the hose
automatically. ACCOMPANY THE HOSE UNTIL IT IS FULLY RETRACTED.
VI. MAINTENANCE AND STORAGE
Before any intervention on product, ensure that product is disconnected from its water supply.
WARNING! Risk of injury from pre‐tensioned springs. Do not open the portable hose reel.
6.1- Maintenance
Clean plastic parts with a soft clean cloth.
Do not use aggressive cleansers (solvents or abrasive cleansers), or an abrasive sponge.
Do not put or immerse product in water or any other liquid.
To clean the hose: fully extend it, clean it with a damp cloth then dry it with a clean cloth, and finally
rewind the hose.
Make sure that no foreign objects enter inside the reel.
6.2- Storage
- Clean product before storage.
- Keep product, user manual and accessories in the original packaging.
- It is recommended to store the product in a clean, dry location, protected from frost, and keep it out
of children's reach (e.g. lock it up).
- Store the hose reel in a place protected from frost: do not store product in temperatures lower than
0ºC (32ºF). Before winter's arrival or when freezing temperatures occur, empty the hose and store it
in a dry place.
- Do not place or store any object on top of the product.
6.3- Disposal
- Do not dispose with household garbage. Do not throw into the environment.
Dispose of the product in a waste collection centre or seek advice from your local municipality.
- Proceed with disposal of the product, accessories and packaging according to local regulations
regarding the protection of the environment.
Publicité
