Publicité
Les langues disponibles
Les langues disponibles
Mains plug
Wipe the mains plug with a dry cloth at regular
intervals.
Moisture and dust may cause fire or electrical shock.
Assembling / Removing the pedestal
Preparations
Take out the pieces of the pedestals and the TV from
the packing case and put the TV onto a work table
with the screen panel down on the clean and soft
cloth (blanket, etc.)
• Use a flat and firm table bigger than the TV.
• Do not hold the screen panel part.
• Make sure not to scratch or break the TV.
Assembling the pedestal
1. Screw the pieces of the pedestals together and
mount the rubber buffers.
2. Place the stand(s) on the stand mounting
pattern(s) on the rear side of the TV.
3. Insert the screws (M4 x 12) provided and tighten
them gently until the stand is properly fitted.
All manuals and user guides at all-guides.com
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking
the TV.
• Put the TV onto a work table with the screen panel
• Unsrew the screws that fixing the stand(s).
• Remove the stand(s).
Please contact your local Panasonic dealer to
purchase the recommended wall-hanging bracket.
Holes for wall-hanging bracket installation;
Rear of the TV
View from the side
Note: The screws for fixing the TV onto the wall-hanging
bracket are not supplied with the TV.
English - 5 -
down on the clean and soft cloth. Leave the stand(s)
protruding over the edge of the surface.
When using the wall-hanging bracket
a (mm)
b (mm)
Depth of
min. (mm)
screw (a)
max. (mm)
Diameter
M6
a
b
200
200
a
5
10
Publicité
