Owner's Manual |
Troubleshooting
dle
r.)
Insert one (1) AA battery (not
included) into the battery socket
with the positive terminal facing
nega-
out, then screw on the ignitor
button until tight. Be careful to not
over tighten.
osi-
rner
e.
08
e-
3-7mm
Assembly Guide
S T E P 0 4
paper towel holder onto the paper towel bracket on the right side of the
griddle unit.
S T E P 0 5
screws pre-installed in the hard
cover handles to attach two (2) hard
cover handles and two (2) hard
cover hooks to the hard cover.
S T E P 0 6
control knobs by pushing them into
place in the OFF position. Insert one
(1) AA battery (not included) under
the ignition button.
Use one (1) M6x12 screw and two (2) gaskets to attach the
Use the four (4) M4x10
Install the four (4)
Model 1863