Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
Note: Prior to assembly, put on work gloves.
1. Attach the two wheel assemblies (Q) to the
bottom plate (R) with eight M6 x 12 mm bolts
(DD) as illustrated. Tighten with the Phillips
screwdriver (OO).
Hardware Used
Bolt M6 x 12 mm
DD
Phillips
OO
Screwdriver
2. Unscrew ignitor knob (marked with a lighting
bolt) on the control box assembly (I). Insert
the AA battery (NN) with positive end (+)
outward and replace the ignitor knob.
Hardware Used
AA battery
NN
The electronic ignition requires 1 "AA" alkaline battery, which is included.
DO NOT mix old and new batteries.
DO NOT mix alkaline, standard (Carbon-Zinc), or rechargable (Nickel-Cadmium) batteries.
DO NOT dispose of batteries in fire. Improper disposal may cause batteries to leak or explode.
1
x 8
2
x 1
NN
WARNING
7
R
DD
Q
I
Publicité
