SAFETY INFORMATION
WARNING
•
This product is fueled by propane gas.
Propane gas is invisible, odorless, and
flammable. An odorant is normally added
to help detect leaks and can be described
as a "rotten egg" smell. The odorant can
fade over time so leaking gas is not always
detectable by smell alone.
•
Propane gas is heavier than air and leaking
propane will sink to the lowest level possible.
It can ignite by ignition sources including
matches, lighters, sparks or open flames of
any kind many feet away from the original
leak. Use only propane gas set up for vapor
withdrawal.
•
Store or use propane gas in compliance with
local ordinances and codes or with ANS/
NFPA 58. Turn off propane when not in use.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and hardware contents above. If any part is missing or damaged, do not attempt to assemble the product.
Contact customer service for replacement parts.
Estimated Assembly time: 45 minutes.
Tools required for Assembly (not included):
Leak Detection Solution, M8 x 100 nails, Work Gloves.
WARNING
•
Alert children and adults to the hazards
of high surface temperatures. Stay away
from these surfaces to avoid burning skin
or igniting clothing.
•
Carefully supervise young children when
in the vicinity of the heater.
•
Do not hang clothing or any other
flammable materials from the heater, or
place on or near the heater.
•
Replace any guard or protective device
removed for servicing the appliance prior
to placing back in service.
•
Installation and repair should be done
by a qualified service person.The heater
should be inspected before use and
annually by a qualified service person.
•
More frequent cleaning may be required
as necessary. It is imperative that the
control compartment, burners, and
circulating air passageway of the
appliance be kept clean.
6