Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
7. Attach the upper plate (E) to the upper
supports (G) with six M5 x 12 mm screws
(EE) as illustrated. Tighten with the Phillips
screwdriver (OO).
Hardware Used
M5 x 12 mm Screw
EE
Phillips
OO
screwdriver
8. Fit the black silicone ring (H) to the lower
edge of the glass tube (F). Carefully install
the glass tube (F) by inserting it through the
center hole in the upper plate (E). Slide the
glass tube (F) into the center hole in the
control box assembly (I).
Check and ensure the glass tube (F) is
positioned properly and is completely
covering the center hole in the control box
assembly (I).
WARNING! The black
silicone ring must be in place
prior to operating the heater.
7
x 6
8
BLACK SILICONE
RING
10
E
G
E
F
H
EE
I
Publicité
