Blackstone E Serie Manuel Du Propriétaire page 6

OWNER'S MANUAL | ASSEMBLY GUIDE
❶ ❶ Use four (4) self tapping screws to attach the two (2)
STEP 02
power cord brackets to the rear right leg�
❷ ❷ Slide the two (2) rear legs into place, and use (4) M6x12 screws to
attach the legs and the rear leg brace to the tabel top�
❸ ❸ For the front right leg, set three (3) M6 nuts in the table top leg
post, slide the leg into place, and use (2) M6x12 screws to secure�
❹ ❹ For the front left leg, set two (2) M6 nuts in the table top leg post,
slide the leg into place, and use (2) M6x12 screws to secure�
❶ ❶ Use eight (8) M6x12 screws to attach the bottom shelf
STEP 03
to the legs�
❷ ❷ Use two (2) step bolts to attach the side shelf to the left legs�
❶ ❶
❶ ❶
❷ ❷
06
❶ ❶
❶ ❶
❶ ❶
❷ ❷
❷ ❷
❸ ❸
❹ ❹
❷ ❷
❹ ❹
Use four (4) M6x12 screws to attach the accessory shelf to
STEP 04
the front legs� Set the cart on its feet�
Model: 8003
❶ ❶
❶ ❶
❷ ❷
❶ ❶
❷ ❷
❸ ❸
BLACKSTONEPRODUCTS.COM/SUPPORT