Télécharger Imprimer la page

Atag OX4592C Mode D'emploi page 128

Masquer les pouces Voir aussi pour OX4592C:

Publicité

Les langues disponibles

Les langues disponibles

MAINTENANCE
Replacing the oven lamp
The lamp in this household appliance is only suitable for illumination of this appliance.
The lamp is not suitable for household room illumination.
The lamp (E14, 230-240 V, 25 W, 300 °C) is a consumer item and therefore does not fall
under the guarantee. First remove the baking tray, oven rack and guide rails.
Cut the power to the appliance by removing the plug from the socket or switching off the
fuse in the fuse box!
Please note: the lamp can be very hot! Use protection to remove the lamp.
Rear wall lamp
5. Turn the cover to the left to remove it.
6. Turn the bulb out of the fitting.
Side wall lamp
7. Use a flat-blade screwdriver to snap and remove the lamp cover from the holder.
8. Be careful not to damage the enamel.
9. Turn the bulb out of the fitting.
EN 28

Publicité

loading