Bartscher 212.301 Mode D'emploi page 22

Declaration of compliance
The manufacturer declares that the appliances of their production are compliant with the above
mentioned EEC directives and requires that installation be done observing the norms in force.
DESCRIPTION OF APPLIANCES
Bain maries
A sturdy structure in steel placed on four feet which make it possible to regulate the height in the
version with cabinet. The external coating is in Chrome-Nickel 18-10 stainless steel.
The vat is made entirely of stainless steel. It is heated by an electric heater activated by a
thermostat. This thermostat makes it possible to regulate the temperature in a range from 30°C to
90°C.
Neutral cabinet
In the standing versions, doors are available for closing the compartment to create a neutral cabinet.
There are also racks available for inserting GASTRONORM wash bowls.
PROVISIONS FOR INSTALLATION
Place
It is advisable to install the appliance in a well- ventilated room or under an extractor hood. The
appliance may be installed as a single unit or together with others.
Installation
Installation operations, voltage conversions to other than the original, starting up the installation or
appliance, ventilation and maintenance must be done following the manufacturer's instructions and
observing the norms in force, by qualified personnel, in compliance with the following provisions
(GB):
ƒ Health and Safety at Work Act, 1974
ƒ Codes of Practice, BS6173, 1982
ƒ The Building Regulations, 1985
ƒ The Building Standards Regulations, 1981
For others countries follow the relevant local rules for:
ƒ Building regulations and local fire prevention provisions
ƒ Safety norms in force
ƒ The Electrical Norms in force
ƒ The Fire Brigade rules
Pag. 21/32