Installation
To reattach the freezer drawer
Once the refrigerator is in or near it's final location, re-attach the freezer drawer by
following the directions in the reverse order of removal.
STEP 4 Levelling the refrigerator
CAUTION
• When installed, the refrigerator must be leveled on a flat, solid floor. Not leveling the
refrigerator can cause damage to the refrigerator or physical injury.
• Levelling must be performed with the refrigerator empty. Make sure no food items are
inside the refrigerator.
• For safety reasons, adjust the front a little higher than the rear.
Level the refrigerator using the special screws (levellers) on the front legs. Use a flat-head
screwdriver to turn the levellers.
28
English
Untitled-1 28
CAUTION
• Be careful not to scratch or dent the rail
assembly.
• Make sure you mount the freezer
baskets in the correct position.
Otherwise, the door will not open or
close properly, which causes frost to
build up.
• Do not store too much food in the
freezer drawer. This prevents the freezer
drawer from closing properly, resulting
in frost buildup.
• To adjust the height of the left side:
Insert a flat-head screwdriver into the
leveller of the left side front leg. Turn
the leveller clockwise to raise the left
side or turn it counterclockwise to lower.
• To adjust the height of the right side:
Insert a flat-head screwdriver into the
leveller of the right side front leg. Turn
the leveller clockwise to raise the right
side or turn it counterclockwise to lower.
2021-05-21
4:47:14