START QUICK MILK CLEAN?
5:00 min
to start press
ON/OFF
my favourites
HOME
clean/setting
START/STOP
4219-450-08061 MANUAL GAG. CAD. PRESTIGE EN-FR 120US.indd 21
Dispensing frothed milk-based coffee beverages
Tip: Preheat the cups with hot water to enjoy a hotter beverage.
Tip: use cold milk (at a temperature of around 5 °C) with a protein content of at
least 3% to ensure optimum results for the froth. You can use either whole milk or
semi-skimmed milk. You can also use skimmed milk, soy milk or lactose-free milk.
1 Press the HOME
button and choose the desired beverage from the menu.
HOME
-
Press the button for the beverage desired and place a suitable cup or glass
beneath the coffee dispensing spout and the carafe dispensing spout.
-
Press the START/STOP
2 The machine will dispense a predefined amount of frothed milk into the cup or
glass. The coffee or the frothed milk may be dispensed first, depending on the
beverage selected.
If you wish to customise the beverage before dispensing, refer to the "Beverage
customisation" chapter.
3 After dispensing your frothed milk-based coffee beverages, it is best to
complete the quick cleaning procedure of the carafe within 10 seconds.
However, the procedure can also be carried out at a later time by opening the
cleaning menu via the CLEAN/SETTING
shown on the display. The cleaning procedure can be carried out with milk in
the carafe.
Note: We recommend cleaning the machine via the quick clean procedure at least
once a day.
Press the START/STOP
procedure at a later time.
Dispensing Hot Water
Warning: when the machine starts preparing hot water, the hot water dispensing
spout may spray steam and hot water. Wait until the end of the preparation before
removing the hot water dispensing spout.
1 Insert the hot water dispensing spout.
button to start brewing the selected beverage.
START/STOP
button. Follow the instructions
clean/setting
button to confirm, or "
START/STOP
English
21
" to carry out the
08/11/2019 13:01:16