Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTION MANUAL
INDUSTRIAL TRIPLEX PUMPS
GENERAL SAFETY INFORMATION
Please read and save these instructions.
Read carefully before attempting to
assemble, install, operate or maintain
the product described. Protect yourself
and others by observing all safety
information.
Failure to comply with
instructions could result in personal
injury and/or property damage! Retain
instructions for future reference.
DANGER: RISK OF
INJURY FROM SPRAY
Always wear safety glasses or goggles
and appropriate clothing.
WARNING: RISK
OF BURSTING
• The pump is designed to pump non-
flammable or non-explosive fluids.
These pumps are intended to pump
clean filtered water only.
• Do not operate in or around an
explosive environment.
• Do not alter the pump from the
manufacturers design.
• Do not operate gasoline engines
in a confined area; always have
adequate ventilation.
• Do not exceed the pump specifications
in speed or pressure.
WARNING: RISK OF
HOT SURFACES
• Do not allow children to operate
the pump.
• Never
point
discharge at a person, any part of the
body or animals.
• Maximum
water
100 °F.
WARNING: This product and its
exhaust can expose you to chemicals
including lead and lead compounds,
and carbon monoxide, which are known
to the State of California to cause cancer
the
high-pressure
temperature
Industrial Triplex Pumps
and birth defects or other reproductive
harm. For more information go to www.
P65Warnings.ca.gov.
WARNING: Adequate protective
guards must cover all moving parts.
Perform routine maintenance on the
pump and components.
WARNING: Use only components
that are rated for the flow and pressure
of the pump, this would include hose,
fittings, safety valves, spray guns etc.
DESCRIPTION
Designed to work at 3400 RPM
when coupled to a gasoline engine.
The 1" (25.4 mm) hollow shaft and
universal mounting flange provides
connection to most 1" (25.4 mm) shaft,
horizontal engines.
SPECIFICATIONS
Oil Capacity:
Ports
•
Inlet Port (Supplied): Standard
garden hose connection with inlet
strainer.
•
Discharge Port (Supplied): Quick
Connect connection.
Thermal
Relief
When the temperature inside the pump
rises too high, this valve will open and
release a gush of water in an effort to
lower the temperature inside the pump.
The valve will then close.
Detergent Injection System (Supplied):
Mixes cleaners or cleaning solvents
with the water to improve cleaning
is
effectiveness.
NOTICE: Allowing the unit to run for
more than two minutes without the
gun trigger being pulled could cause
overheating and damage to the pump.
Do not let the pressure washer run
2- ENG
12.4 oz. (365
ml)
Valve (Supplied):
Publicité
