Publicité
Les langues disponibles
Les langues disponibles
• Ensure that no highly flammable liquids are located near the device. Risk of fire!
• After use, place the device on a heat-resistant surface.
Notes
• Only pull the cable from the socket by the mains plug.
• Remove all packaging material before using the device.
• Only connect the device to a socket that has the voltage shown on the type plate.
• Do not use any additional parts that are not recommended by the manufacturer or offered as
equipment.
• Under no circumstances should you open or repair the device yourself, as faultless functionality
can no longer be guaranteed thereafter. Failure to comply will result in voiding of the warranty.
• In the event of a fault or damage, have the device repaired by a certified specialist workshop.
• Never leave the device unattended during use.
• Do not use the device outside.
• If you pass on the device to someone else, make sure to also pass on these instructions for use.
5. Device description
1
2
11
3
4
5
7
6
8
9
10
16
1
Volume diffuser
2
Air outlet
3
Removable filter
4
Cold air button
5
Heat setting switch with three
settings:
1 Low temperature
2 Medium temperature
3 High temperature
6
Blower switch with three settings:
0 Off
1 Gentle air flow
2 Strong air flow
7
Contact sensor
8
Operating light
9
Anti-kink protection with hanging
eyelet
10
Mains cable
11
Rotating professional nozzle
Publicité
