Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
REQUIREMENTS
Assemble the necessary tools and supplies before beginning the
washer installation. The parts supplied are in the washer basket.
Do not put the styrofoam back into the washer.
Tools needed for connecting
the drain hose and
water inlet hoses
•
Pliers (that open to 1%8 in. {3.95 cm})
•
Flashlight (optional)
Parts supplied:
2
3
1. Drain hose "hook"
2. Yellow, single-wire
hose clamp
(for the top of the drain hose)
3. Water inlet hoses (2)
4. Flat water inlet hose washers (4)
4
Tools needed
for securing the drain hose and
leveling the washer
•
Open end wrench 9/16 in. (1.45 cm)
•
Level
•
Wood block
•
Ruler or measuring tape
Parts supplied:
2
1. Beaded tie strap
2. Front leveling feet with nuts (2)
3. Rear self-adjusting
feet (2)
Parts listed are available from your local Sears store or Sears
Service Center, In the United States, call 1-800-366-PART
(1-800-366-7278).
In Canada, call 1-877-533-6937.
'_4_
If You Have
You Will Need to Buy
Laundry tub or
Sump pump system (if not already
standpipe taller
available)
than 96 in. (2.4 m)
Overhead sewer
Standard 20 gal (76 L) 39 in. (99 cm) tall
drain tub or utility sink and sump pump
(available from local plumbing suppliers)
Floor drain
Siphon break, Part Number 285834;
additional drain hose, Part Number
8318155 and connector kit,
Part Number 285835
Drain hose too
Drain hose, Part Number 8318156 and
short
connector
kit, Part Number 285835
Lint clogged drain
Drain protector, Part Number 367031
and connector kit, Part Number 285835
Water faucets
beyond reach of
fill hoses
2 longer water fill hoses:
6 ft (1.8 m) Part Number 76314,
19 ft (3.0 m) Part Number 350008
Publicité
