Publicité
Les langues disponibles
Les langues disponibles
Rinses
•
Rinsing is accomplished
in the same manner as washing.
Fresh water is added to a slow spinning load. Then the load
moves through the spray rinses. The water is then drained
away and the rinsing process is repeated. The number of
rinses varies depending on the cycle.
•
During the last rinse, fabric softener is dispensed into the
bottom of the tub and then sprayed through the load.
Final Spin
•
The last of the rinse water is drained and the load is spun.
The amount of spinning depends on the cycle selected.
To make unloading easy the load is peeled off the sides of the
basket by the CALYPSO
TM
Wash Motion.
Normal Washer Sounds
As with any new product, you will hear sounds that you are not
accustomed
to. You may hear various sounds occurring during
the washing, rinsing and spinning process. Between changes in
wash actions, there will be momentary pauses. You will hear
water spraying and splashing during the wash and rinse cycles.
These new sounds and pauses are part of normal washer
operation. (See "Troubleshooting.")
Use this feature to select the desired prewash and rinse options
for your wash cycle.
Prewash
Options
Select a prewash option to ensure thorough cleaning of your
heavily soiled and stained loads.
0SATURATED SOAK
O_rAIN
TREAT
PREWASH
OP_ONS
Saturated Soak
Use this option for set-in stains and soil that need extra time for
removal. Soaking in this washer is different than in a conventional
washer. The washer sprays the load with water and detergent for
4 minutes at extra low spin speed followed by a brief period of
wash action at the speed of the selected cycle. Then another 4
minutes of spraying and extra low spinning occurs. The wash
action then pauses for the detergent to work on the soils. The
SATURATED SOAK feature is followed by the selected cycle.
Using SATURATED SOAK will extend your wash cycle by 16
minutes.
Stain Treat
Selecting this option boosts cleaning in any cycle. This option
allows you to use more detergent than you would normally use in
a single cycle. For best results, use 2 times the amount of
recommended
detergent for a load. Using STAIN TREAT will
extend your wash cycle by 14 minutes.
Rinse/Spin
Options
Selecting this option allows you to choose a 2nd Rinse and
Extended Spin option. You may also select and run EXTENDED
SPIN and RINSE/SPIN without first selecting a cycle. RINSE/
SPIN is not available if a cycle has been selected.
O2ND RINSE
eE_HDIED
SPl_
• D_NSE/ SPIN
Press RINSE/SPIN OPTIONS until the indicator light next to the
desired setting glows.
2nd Rinse
Selecting this option provides a second rinse with the same
water temperature
as selected for the first rinse. A 2nd Rinse can
be added to any wash cycle.
Extended Spin
This option adds an additional 3 minutes of spin to any cycle to
reduce drying time and save energy. If you select EXTENDED
SPIN and do not select a wash cycle, you will get an 8 minute,
high speed spin.
Rinse/Spin
Use this option to get a combination
of rinses and spins followed
by a high-speed
spin. The time display will include an estimate of
how long it will take to fill and drain the washer. Fabric softener
can be added to the Fabric Softener dispenser.
When to use Rinse/Spin:
•
For loads that need rinsing only.
•
For completing a cycle after the power has been off.
•
To add fabric softener to load.
To use or change Rinse/Spin
settings:
1. Add fabric soffener to the dispenser (if desired),
2. Press the RINSE/SPIN OPTIONS control until the RINSE/
SPIN indicator light glows.
3. Press START.
15
Publicité
