Ryobi RY43160A Manuel D'utilisation page 5

 Maintain product with care. Keep cutting edge
sharp and clean for best performance and to
reduce the risk of injury. Follow instructions
for lubricating and changing accessories.
Inspect cord periodically and, if damaged, have
it repaired by an authorized service facility.
Inspect extension cords periodically and replace
if damaged. Keep handles dry, clean, and free
from oil and grease.
 Check damaged parts. Before further use of the
product, a guard or other part that is damaged
should be carefully checked to determine that
it will operate properly and perform its intended
function. Check for alignment of moving parts,
binding of moving parts, breakage of parts,
mounting, and any other condition that may
affect its operation. A guard or other part that
is damaged should be properly repaired or
replaced by an authorized service center unless
indicated elsewhere in this manual.
SPECIFIC SAFETY RULES
SPECIFIC SAFETY RULES
Page 5 — English
 Disconnect the plug from power source when
not in use, before servicing, and when changing
accessories.
 Service on the product must be performed
by qualified repair personnel only. Service
or maintenance performed by unqualified
personnel could result in injury to the user or
damage to the product.
 If the power supply cord is damaged, it must
be replaced only by the manufacturer or by an
authorized service center to avoid risk.
 Save these instructions. Refer to them frequently
and use them to instruct others who may use
this product. If you loan someone this product,
loan them these instructions also to prevent
misuse of the product and possible injury.