Publicité
Les langues disponibles
Les langues disponibles
CARE AND MAINTENANCE
Keep the scanner dry. If it gets wet, wipe it dry immediately. Use and store the scanner
only in normal temperature environments. Handle the scanner carefully: do not drop it.
Keep the scanner away from dust and dirt, and wipe it with a damp cloth occasionally to
keep it looking new.
GENERAL USE
●
Always write down the programmed frequencies in the event of memory loss.
●
If memory is lost, simply reprogram each channel.
The display shows blank digits - - - - - - in all channels when there has been a
memory loss.
●
Always press each button firmly until you hear the entry tone for that key entry.
LOCATION
●
Do not use the scanner in high-moisture environments such as the kitchen or
bathroom.
●
Avoid placing the unit in direct sunlight or near heating elements or vents.
●
If the scanner receives strong interference or electrical noise, move it or its antenna
away from the source of the noise. If possible, a higher elevation might provide
better reception.
●
Also try changing the height or angle of the antenna.
CLEANING
●
Clean the outside of the scanner with a mild detergent.
●
To prevent scratches, do not use abrasive cleaners or solvents. Be careful not to rub
the LCD window.
●
Do not use excessive amounts of water.
BIRDIES
All radios can receive "birdies" (undesired signals). If your scanner stops during Scan
mode and no sound is heard, it might be receiving a birdie.
Birdies are internally generated signals inherent in the electronics of the receiver.
●
Press ▲/▼ to resume scanning.
●
Or press (L/O) to lock out the channel or frequency.
English
53
Publicité
