Model Description; Model Designation; Specifications; Plug Configurations - Hatco PW Série Manuel D'installation Et D'utilisation

MODEL DESCRIPTION

All Models
Hatco Plate Warmers hold up to 25 plates and heat them to
the desired temperature. Plates can be up to 12" (305 mm)
in diameter. Features include a digital temperature controller,
a Power I/O (on/off) switch, overhead LED display lights,
and a detachable 6' (1829 mm) power cord. The electronic
temperature range of this unit is 104°–122°F (40°–50°C).
PWC Models
PWC models are countertop units.
Model PWC

MODEL DESIGNATION

SPECIFICATIONS

Plug Configurations

Units are supplied from the factory with a detachable power
cord and plug. Plugs are supplied according to the application.
WARNING
ELECTRIC SHOCK HAZARD: Plug unit into a properly
grounded electrical receptacle of the correct voltage,
size, and plug configuration. If plug and receptacle do not
match, contact a qualified electrician to determine and
install proper voltage and size electrical receptacle.
NOTE: Specification label located on the lower back of the
unit. See label for serial number and verification of unit
electrical information.
P W X - x x
Plate Warmer
C = Countertop
B = Built-In
PWB Models
PWB models are built-in units.
NOTE: A wall mount bracket is available as an accessory
for the PWC models. Refer to the OPTIONS AND
ACCESSORIES section for more information.
Maximum diameter of plates
(inches)
Plug Configuration
NOTE: Receptacle not supplied by Hatco.
4
English
Model PWB
NEMA 5-15P
Form No. PWM-0721