Domo DO91218F Mode D'emploi page 40

Under normal conditions, it is best to select -18°C for use as a freezer or +4°C for use as a refrigerator.
Press the "TEMP" button
· The operating time and temperature are influenced by the location of the freezer, the number of times
the door is opened and the temperature of the room the freezer is in.
Celsius/Fahrenheit
· The temperature can be displayed in Celsius or Fahrenheit. To change this, keep the "TEMP" button
pressed for 3 seconds. The symbol "°C" of Celsius or "°F" of Fahrenheit will be displayed.
Super-freezing
· Select this function if the standard temperature does not cool sufficiently. For example: with
extremely hot weather, if the doors are opened often, with a high environmental temperature, if a
large quantity of uncooled/unfrozen food is placed in the appliance, etc.
· Press the "SUPER" button. The symbol
· By selecting this function, the freezer temperature is lowered to -30°C for a maximum of 24 hours. It is
recommended that this function be selected 5 hours prior to the freezing.
· This function is switched off automatically after the time has elapsed. The previously set temperature
will once again be maintained.
· This function can be turned on and off by pressing the "SUPER" button again.
· After a power cut, the super freeze function will not be reactivated automatically.
Sleep mode
The sleep mode is set automatically. When the temperature has been set, the display will switch off
automatically after 30 seconds.
· You can switch off the sleep mode by keeping the "TEMP" button and the "SUPER" button pressed
simultaneously for 5 seconds. "OF" will appear once on the screen and the display will stay on.
· You can switch the sleep mode on again by keeping the "TEMP" button and the "SUPER" button
pressed simultaneously for 5 seconds. "ON" will appear once on the screen.
CHILD SAFETY LOCK
The child safety lock automatically blocks the buttons for safety.
· The childproof lock switches on automatically if no button is pressed for 30 seconds. Or hold down the
"SUPER" button for 3 seconds to lock the panel. The display will blink once and the set temperature
will take effect immediately.
· Press the "SUPER" button (child safety lock) for 3 seconds to unblock the panel. The display will blink
once.
ALARM
There is a temperature sensor in the freezer. The temperature indicator light
power is interrupted or the temperature gets too high. This alarm is a warning so that you do not
accidentally leave the door open and spoil your food. The alarm stops as soon as the door is closed
again.
! Caution: If error code "E2" appears on the display, contact us for a service call.
40
DO91218F
and continue to press until the desired temperature is displayed.
will be displayed.
CL
lights up if the