SCHUBERTH C3 PRO Mode D'emploi page 44

G. FOR YOUR SAFETY
Warning:
Always check your helmet before every ride!
1. Check the face shield and sun visor.
2. Check the correct function of the shield and visor mechanics.
3. Check for cracks in the helmet. Strong acid (e.g. battery acid) can
damage the shield bases. If you find cracks or damage, stop using
the helmet immediately.
4. Check helmet for deterioration. If you find deterioration in any part of
a component, either replace that component or get a new helmet. If
these parts come loose and/or fall off while you are riding, your vision
may be blocked, which could cause an accident resulting in serious
personal injury or death.
5. Check the security of the retention system.
Warning:
Don't mistreat your helmet!
Never ride with the helmet hanging from the helmet holder, and do not
hang the helmet from angled supports such as a mirror. Do not sit on
or throw your helmet. You should not expose the liner of your helmet
to strong sunlight and excessive heat such as near heaters or where
temperatures exceed 50 °C (122 °F). Avoid spraying insect repellent
chemicals (such as "naphthalene") near the helmet. Mistreating your
helmet will damage the shell and impact absorbing liner, reducing the
helmet's ability to protect you in an accident.
Warning:
Don't use the helmet for anything than motorcycling!
No helmet provides absolute protection from all conceivable impacts.
This helmet has been specially developed for motorcycle riding.
It may not be suitable for other purposes.
Warning:
Replace the helmet after no more than five years!
The useful life of the helmet depends on its use and care.
We recommend that this helmet has to be replaced after no more
than five years from its date of purchase.
44