SCHUBERTH C3 PRO Mode D'emploi page 35

14. VENTILATION SYSTEMS
VENTILATION DEVICE 1 – FACE SHIELD SETTING
The C3 PRO has a face shield that adjusts to several positions. Depending
on your road speed and the tendency of the face shield to mist up, open the
face shield sufficiently wide to stop it misting up but so that it still protects
your eyes from excessive draft.
Urban position
In its second locking position, the face shield is automatically in urban
position. Air entering through the bottom gap flows over the inside of the
face shield and escapes through the opening at the top.
VENTILATION DEVICE 2 – INLET VENT
(face shield ventilation)
IN CHIN AREA
To ventilate the face shield, the C3 PRO is provided
with an inlet in the chin area. Irrespective of riding
posture, around 80-90% of the central airstream
flows directly into this inlet when open. A deflector
ensures that the air current ventilates the face shield
effectively even at low road speeds. You can open
and close the inlet by pushing the vent upwards or
downwards.
EN
35