SCHUBERTH C3 PRO Mode D'emploi page 28

D. THE HELMET
Fitting the sun visor
1. Put the sun visor between the snap
connections and fit it on to the locating
pegs on one side and then on the
other.
2. Position the sun visor between helmet
inner and outer shell and lower it with
the operating slide.
3. For safety, check that the sun visor
mechanism is functioning correctly.
Warning:
Make sure that the sun visor is properly engaged in the sun visor
sockets. If not properly engaged the sun visor comes loose and/or falls
off while you are riding, your vision may be limited or blocked, which
could cause an accident resulting in serious personal injury or death.
13. INNER LINING
The replaceable inner lining of the C3 PRO is washable and ensures both an
excellent fit and improved ventilation of the helmet.
The high-comfort cheek pads ensure that the helmet fits comfortably
around the cheeks, and the headband pad provides an optimal fit all around
the head. The head pad sits comfortably on the head without covering the
ventilation channels.
The internal lining consists of skin-friendly materials throughout, particularly
in areas that come in contact with the head. These are a soft, breathable
COOLMAX material that transports heat and moisture very well, a special
®
noise-reducing Polygene
sweat-absorbing Interpower
28
material with antibacterial properties and a
®
material.
®