Télécharger Imprimer la page

Atag VA8113QT Notice D'utilisation page 68

Publicité

Les langues disponibles

Les langues disponibles

NOTE!
Dishwashing results may be affected if the coarse and fine filters are incorrectly fitted. The
dishwasher must not be used without the filters in place!
Cleaning the spray arms
Holes and bearings can sometimes become blocked. Remove any debris using a pin or the like.
The spray arms also have holes underneath.
To facilitate cleaning you can remove the spray arms. Remember to fit them firmly back into place
afterwards.
Upper spray arm
1. Pull out the upper basket.
2. Unscrew the spray arm bearings counterclockwise to remove the spray arm from the upper
basket.
Check that the coloured stop
on the right in the bottom
drain is in place.
Care and cleaning
25

Publicité

loading