Télécharger Imprimer la page

Epson V12H917F01 Guide De L'utilisateur page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Special techniques are required to install or remove this product, so make sure you
contact a specialist or your local dealer. Failure to do so may cause electric shock or
malfunctions to occur.
Disconnect the power cord from the projector before installing/removing this prod-
uct to/from the projector.
Installing/removing the product while the power cord is connected may cause elec-
tric shock to occur.
Do not use sprays that contain ammable gas to remove dust or lint from the prod-
uct. The high heat generated inside the projector may cause a re.
Do not use or install in locations where it may be subject to water or rain, or high
humidity, such as outdoors, in a bathroom, or shower room, and so on. Otherwise, it
could cause a re or electric shock to occur.
Do not place the product in a location subject to high levels of dust or humidity, or
in a location subject to smoke or steam such as on a work surface or near a humidi-
er. Otherwise, it could cause a re or electric shock to occur.
Unless you are a quali ed service technician, do not open the product's case unless
instructed to do so in the User's Guide. Never disassemble or remodel the product.
There are high-voltage components inside the product that could cause re, electric
shock, or an accident to occur.
Do not place containers containing water or any chemical products and so on near
this product. If anything spills or enters the product, it could cause a re or electric
shock to occur.
4
Warning

Publicité

loading

Ce manuel est également adapté pour:

Elpif01