Télécharger Imprimer la page

XO Appliance XOJ30SC Instructions D'installation page 18

Publicité

Les langues disponibles

Les langues disponibles

d
o
elay
FF button
- If fan is off, press once and fan will turn on at low speed and automatically turn off after five
(5) minutes.
- If the fan is already on (example high speed) the fan will change to low speed when the
Delay Off Button is pressed and turn off after five minutes.
- When the Delay Off Function is on, the user can still change the fan speed by pressing the
Fan Speed Button without interrupting the five minute Delay Off Timer.
- Delay Off Function can be turned off by pressing Delay Off Function button or Power Button.
l
(5)
ight indicator
- Light indicator will turn on when lights are turned on at any light level.
d
o
elay
FF indicator
- Delay Off Indicator will light up when Delay Off Function is activated by pressing the Delay
Off Button.
- Delay Off Indicator will turn off after the Delay Off Function has completed the five minute
cycle or if the user presses the Delay Off Button again or the Power Button.
delay off timer enabled and fan speed changed to 1
c
a
lean
ir indicator
- Clean Air Indicator is disabled by default and must be enabled by the user.
- To enable Clean Air Function:
With hood off, hold the Power Button down for five seconds. Clean Air Indicator light will
illuminate, and the fan will turn on low speed for 10 minutes. After 10 minutes the fan will turn
off and the 4 hour timer will begin.
Clean Air Indicator will remain on when Clean Air Function is enabled, even if fan is not on.
- When Clean Air Function is enabled, every four hours of non fan usage the fan will automatically
turn on at low speed for 10 minutes. After 10 minutes the fan will turn off and the 4 hour timer
will reset.
- When the Clean Air Function automatically turns the fan on the Clean Air Indicator will blink
and the Low Speed fan indicator will illuminate.
- If the user changes the fan speed while the Clean Air Function is operating, the Clean Air
Indicator will stop blinking but will remain illuminated. When the user manually turns the hood
(4)
(6)
(7)
- 18 -

Publicité

loading

Ce manuel est également adapté pour:

Xoj36scXoj42sc