Kuppersbusch EKI8940.1 Notice D'utilisation page 36

INSTALLATION INSTRUCTIONS
The installation must be performed by a qualified electrical contractor. This contractor will take
the entire responsibility of the installation. The installation has to comply with the legislation and
the standards in force in your country.
How to stick the gasket:
The gasket supplied with the hob prevents the intrusion of liquids into the cabinet below.
Its installation has to be done carefully, as described below.
Aeration
Fitting - installing:
 Cut out sizes of the worktop:
EKIF8940.1
EKI8940.1ED
EKI8940.1F
EKI8940.1PWF
EKI8940.1BCF
A
798 mm 518 mm
800 mm 520 mm
Stick the gasket (2) two millimeters
from the external edge of the glass,
after removing the protection tape (3).
B E
750 mm
750 mm
36
F H
490 mm 48 mm
490 mm 48 mm