ADAMAS 792000X Instructions D'utilisation page 21

DECLARATION OF CONFORMITY
We declare under our sole responsibility that this pro-
duct (B16) is in conformity with the following standards or
standardized documents:
EN 12348; EN 982
98/37/EC (≤ 28-12-2009); 2006/42/EC (≥ 29-12-2009);
97/23/EC
Director
N.J.M. Knijnenburg
12.05.2009
Adamas B.V. Aartsdijkweg 19 NL-2676 LE Maasdijk
MAINTENANCE
Generally it can be put that regular main-
tenance (checking, cleaning, oiling) has a
positive effect on the safety for the operator
and the lifetime of the machinery.
The machinery needs very little maintenan-
ce. The recommended maintenance and intervals are
mentioned in the table below.
Frequency Activity
Cleaning the:
After every
• guidance
sawjob
• fast exchange system
General check for:
• damage
Check the sliding blocks
Weekly
for:
• adjustment
• wear
Grease:
Monthly • toothrack
• adjustment bolt
Annually Major service
WARRENTY
For this product is a warranty period of 12 months appli-
cable from the date of delivery. Guarantee claims has to
be proved by showing the purchase invoice. Guarantee
claims have to be proved by showing the purchase invoice.
The guarantee includes the repair of defects which have
occurred and can be linked by to material or manufactu-
ring faults. Transport costs for the equipment from and to
the client are to be paid by the client. Travel- and housing
costs for repair personnel on site are to be paid by the
client.
Not covered by guarantee:
- Defects or damages which have arisen due to incorrect
use or connection.
- Machine overload.
- When maintenance has been carried out incorrectly or
badly.
- Information in the manual has not been properly follo-
wed.
- The machine is used by unqualifi ed persons.
- If the machine is used for purposes for which it is uns-
NMH0160 • 05.04.2013
uitable.
- The machine is repaired using unoriginal parts.
- If the machine encryption is damaged or deleted.
-If defects are caused by fi re, damp and/or transport.
DISPOSAL
SYMBOLS
Remarks
with water + grease
with tefl onspray
with water
adjust if necessary
replace if necessary
To be done by Ada-
mas or an authorised
Adamas agent
Separate collection. This product must not
be disposed of with normal household
waste. The drill stand, accessories and
packaging should be sorted for environ-
mental-friendly recycling.
Do not dispose of together with
household waste material!
This product is in accordance with
applicable EC directives.
Visual check.
Always disconnect the plug from
the socket before carrying out any
work on the machine.
Please read the instructions care-
fully before starting the machine.
WARNING
Accessory - Not included in
standard equipment, available as
an accessory.
ENGLISH
21