Kuppersbusch KI6880.1SR Mode D'emploi page 65

EN
larger container.
A humming is heard when starting to
cook in the induction zones:
With containers which are not very
results from the transmission of energy
directly to the bottom of the container.
the power level slightly or use a
or of one piece.
The touch control does not light up or,
despite lighting, does not respond:
No heating zone has been selected.
Be sure to select a heating zone before
operating it.
and/or your fingers are wet. Keep
the touch control surface and/
or your fingers clean and dry.
The locking function is activated.
Unlock the controls.
The sound of a fan is heard
while cooking, which continues
even after cooking has ended:
The induction zones have a fan to
keep the electronics cool. This only
operates when the electronic circuits
get hot. It stops again when the
circuits cool whether the hob is turned
on or not.
The symbol will appear on the
power indicator of a hotplate:
pot or pan on a hotplate or it is of an
unsuited type.
message C81 or C82 will appear on
the indicators:
Excessive temperature in the electro-
nics or on the glass. Wait for a while
for the electronics to cool down or
remove the pot or pan so that the
glass can cool.
message C90 appears on the power
indicators (3):
sensor is covered and doesn't allow
switching on the cooktop. Remove the
possible objects or liquids keeping the
until the message disappears.
64