Kuppersbusch KI6880.1SR Mode D'emploi page 60

base (preferably "sandwich" type) as
Fig. 8
To ensure the correct operation of these
the cooking zone are not hot at the start
of the process.
Further information about suitable pans
given on the Küppersbusch web page.
These functions require that
the bottom of the vessel used covers
the two ( ) of the cooking zone;
Fig.9
The Touch Control has special features
that help the user to cook through the
CHEF sensor (16).
To activate a special feature on a zone:
1
the decimal point (4) will be active on
the power indicator (3).
2 Now click on the CHEF sensor
(16). The sequentially successive
presses will go over all the Cooking
functions available in each zone one
by one. These functions will show
the activation with the corresponding
If you want to cancel a special active
the "slider" cursor sensor (2) of the
related zone to select it. The decimal
point (4) of the power indicator (3) will
(2) cursor in the position ''0'' .
KEEP WARM FUNCTION
This function sets an automatic power
control suitable for keeping the cooked
food hot.
on the CHEF sensor
led (17) located on the icon
symbol
indicator (3).
You can override the function at any time
special function.
MELTING FUNCTION
This function sets an automatic power
control suitable for maintaining a low
temperature in the cooking zone.
Ideal for defrosting food or for slowly
on the CHEF sensor
led (18) located on the icon
symbol
indicator (3).
You can override the function at any time
special function.
SIMMERING FUNCTION
This function sets an automatic power
control suitable for keeping simmering.
sensor (16) until the led (19) located
on the icon
appear on the power indicator (3).
You can override the function at any time
.
special function.
(depending on the model)
This function enables the automatic
(16) until the
lights
will appear on the power
(16) until the
lights
will appear on the power
lights up. Once the
will
where the symbol appears.
Conditions of the container
For a proper operation of the Quick
container that meets the following
preconditions:
- Bottom size as close as possible to
the diameter of the plate.
-WITHOUT CAP.
- Filled to over half its capacity at
room temperature water (never
use warmed or hot water).
Failure to comply with these conditions
will distort the proper control of boiling.
WARNING: do not use this
feature for a different cooking
purpose other than boiling water.
Never use oil, it may lead to overheat
Activation of the function
and press the CHEF sensor
until the led (20) located on the icon
lights up.
power indicator (3) ; a moving segment
is under system's control.
When the system detects that it is about
Take this opportunity to prepare your
food for boiling or baking as desired.
be heard; if you have not already done
activate the timer and stopwatch for you
so that you can control how long the
food is to be boiled and the symbol
will appear on the power indicator (3).
30 seconds after activating the
system will decrease the power supplied
in order to maintain a gentle and
continuous boil. The timer will remain
EN
(16)
59