Télécharger Imprimer la page

Kuppersbusch KI6880.1SR Mode D'emploi page 58

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 66
Table 2
FOR ANY COOKING ZONE
(depending
on model)
cooking zone by using the touch
controls. Otherwise an undesired
operation could occur if a pan is
accidentally placed on the cooking
zone during the 30 seconds. Avoid
possible accidents!
Fig.7
undesired operations. This function is
useful as a childproof safety.
(6) for at least one second. Once
on indicating that the control panel is
simply touch sensor
centered
2 points
on 1 point
covered
8 cm
22 cm
-
15 cm
If the on/off sensor
to turn off the appliance while the
possible to turn the cooktop on again
until it unblocks.
Silencer of the beep
touch key
key
(6) simultaneously for three
each action will be deactivated. The
time indicator (12) will display "OF".
This deactivation will not be applied
or the locking/unlocking of the touch
keys always remain activated.
To once again activate all the beeps
simultaneously press the touch key
(11) and the locking touch key
for three seconds. The time indicator
(12) will display "On".
Stop&Go Function
This function puts the cooking process
on pause. The timer will also be
paused if it is activated.
Activating the Stop&Go function.
(6) again.
4 points
vertical
covered
24 cm
-
(1) is used
(11) and the locking touch
(6)
Touch the Stop &Go sensor
.The power indicators will show the
symbol
to indicate cooking has
been paused.
Deactivating the Stop&Go function
Touch Stop&Go sensor
The cooking is resumed under the
same power and timer settings that
were established before the pause.
Power Function
This function supplies "extra" power
Said power depends on the size of the
the maximum value permitted by the
generator.
1 S l i d e t h e f i n g e r a b o v e t h e
corresponding cursor slider (2)
until the power indicator (3) shows
second.
2 The power level indicator (3) will
will start to supply extra power.
The Power function has a maximum
adjust to 9. A beep sounds.
either by means of touching cursor
"slider" modifying its power level or
repeating step 3.
Timer Function
(countdown clock)
This function facilitates cooking given
that you don't have to be present: You
simultaneously program each plate for
durations ranging from 1 to 99 minutes.
When cooking with one of these
EN
(6)
(6) again.
57

Publicité

loading

Ce manuel est également adapté pour:

Ki8880.1srKi9880.1sr