Kuppersbusch KI6880.1SR Mode D'emploi page 56

press the enter button that appears on
the screen. Küppersbusch facilitates
the creation of the account by allowing
by generating an account with an email
"Register now" under the login button
and follow the instructions for creating
you will be able to log in to the application
and access the home screen.
Attention!
K-Connect connected products
operate in the 2.4 GHz Wi-Fi band
under 802.11 b/g/n standard. Make
sure it is active on your router.
CONNECTION CONFIGURATION
Access the K-Connect APP with your
user account and click on the '+'
icon at the bottom right. Follow the
steps indicated and consult the help
available in case of doubt. With the hob
for 5 seconds when the APP prompts
you. You will see an animation on the
display (12) and for the next 5 minutes
the hob will be ready to receive the
from the APP.
WI-FI ACTIVATION/DEACTIVATION
Once the connection has been
connected or disconnected at will by
pressing the Wi-Fi button
during the activation and connection
process the LED (9) associated with
stops after a few seconds and will
automatically return to its previous
state when it is switched on again.
CONNECTION STATUS
The LED (9) on the Wi-Fi button
informs you about the connection
status at all times. It stays on if the
connection has been successfully
established and goes out when the
hob is not connected. In the event of
be shown together with an error code
on the display (12).
ERROR MANAGEMENT
In the event of a problem related to
will be shown on the display (12) in
value whose description can be found
in Table 1. Pressing the Wi-Fi button in
the presence of an error removes the
information from the display.
it is not possible to cook remotely
(non-presential) using the K-Connect
application. A detailed display showing
the current status of the hob is included
T h e s t a t u s c a n b e m o n i t o r e d
(8)
visualization of all parameters that
By tapping on each cooking zone
additional information if you are using
a special function.
SETTING THE MAXIMUM POWER
LIMIT
The maximum total power consumed
(8). The
by the hob can be limited from the APP.
of your hob. Click on the icon in the top
right corner
and select the desired maximum
power value. Apply the changes and
confirm by tapping on any of the
sliders on the hob when you see the
The beep that accompanies each
action can be activated or deactivated
from the APP (Not applicable for all
functions).
To do this go to the monitoring screen
of your hob. Click on the icon in
the top right corner
on configuration and activate or
deactivate the buzzer function. Apply
on any of the sliders on the hob when
If you also have a hood with
synchronise the operation of both of
allowing the extraction power to be
automated depending on the status of
access the control screen in one of
them and enable this functionality
which appears at the bottom of the
screen.
Even if you activate this automatic
able to modify its operation from the
control panel at any time.
the vessel, covers one or more of
the references (
Induction cooking zones have a built-
will stop working if there is no pan
present or if the pan is not suitable.
The power indicator (3) will show a
symbol to designate "there is no pan
. Then tap on settings
detected or the pan is not suitable
stop supplying energy and it will show
the symbol for "there is no pan".
When a pan is once again placed
will resume at the same power level
previously selected.
The time for pan detection are 30
seconds. If a pan is not placed
. Then click
Pan detector
Make sure that the bottom of
)on the surface
EN
55