Kuppersbusch KI6880.1SR Mode D'emploi page 55

EN
2 Cursor slider for controlling power.
Power and/or residual heat
indicator*.
Decimal dot of power and/of
residual heat indicator.
Direct access to "Power" function.
Activation sensor for "Block" or
"Stop&Go" functions.
Pilot indicator light "Block" function
activated*.
Activation sensor for "Full Flex"
function.
Pilot indicator light "Wi-Fi" function
activated*.
"Minus" sensor for timer.
"Plus" sensor for timer.
Timer indicator.
Decimal dot of the timer.*
Activation sensor for "Flex Zone I"
and "Full Flex" function.
Activation sensor for "Flex Zone II"
activated*; (depending on model).
Activation sensor for "Chef"
functions.
Pilot indicator light "Keep Warm"
function activated*.
Pilot indicator light" Melting"
function activated*.
Pilot indicator light "Simmering"
function activated*.
Pilot indicator light "Quick Boiling"
function activated*.
Pilot indicator light "Grilling"
function activated*.
Pilot indicator light "Pan Frying"
function activated*.
Pilot indicator light "Deep Frying"
function activated*.
Pilot indicator light "Poaching"
function activated*; (depending on
model).
activated*; (depending on model).
Pilot indicator light "Rice Cooking"
function* ; (depending on model).
Activation sensor for "Slide
Cooking" (depending on model).
Pilot indicator light "Slide Cooking"
function activated*; (depending on
model).
* Only visible while running.
The manoeuvres are done by means
of the touch keys. You do not need
to exert force on the desired touch
function
Use the cursor slider (2) to adjust
54
power levels (0 - 9) by sliding your
towards the left decreases it.
It's also possible to directly select a
power level by placing your finger
directly on a desired point of the cursor
slider (2)
In order to select a plate on
these models, directly touch the
cursor slider (2).
SWITCHING ON THE DEVICE
1 Touch the On touch key
least one second. The touch control
heard and the indicators (3) will light
up displaying a "-". If any cooking
If you do not take any action in the
next 10 seconds the touch control will
you can disconnect it at any time by
touching the touch button
if it has been locked (lock function
activated). The touch button
always has priority to disconnect the
touch control.
ACTIVATING PLATES
Once the Touch Control is activated
with sensor
turned on by following these steps:
1 Slide the finger or touch in any
position of one of the cursors "slider"
(2). The zone has been selected
and simultaneuously the power
level will be set between 0 and 9.
That power value will be shown on
the corresponding power indicator
and its decimal dot (4) will keep light
up during 10 seconds.
2 Use the cursor slider (2) to choose a
new cooking level between 0 and 9.
TURNING OFF A PLATE
Using the touch slider key (2) lower
the power to level 0. The hotplate will
H will appear in its power indicator
cooking area is hot and there is a risk
light up if the hob is still connected.
TURNING ALL PLATES OFF
All plates can be simultaneously
disconnected by using the general on/
(1). All plate indicators (3)
(1) for at
CONNECTIVITY
Functions
This hob model features Wi-Fi
actions from the K-Connect APP.
The new K-Connect system allows
access to its compatible appliances
through the APP available for both
Android and iOS. K-Connect is
(1)
available both in Google Play and
App Store and you can search there or
access them directly by scanning the
QR codes we include below:
Once you have downloaded the app
will need to create a user account. To