Intended Use - DeWalt DCS310 Guide D'utilisation

FIG. 2
B
C
H
A

INTENDED USE

This reciprocating saw is designed for professional cutting of wood,
metal, plastic and drywall.
G
D
I
F
E
K
J
DO NOT use under wet conditions or in presence of flammable
liquids or gases.
This reciprocating saw is a professional power tool. DO NOT let
children come into contact with the tool. Supervision is required when
inexperienced operators use this tool.
Variable Speed Trigger Switch (Fig. 2, 3)
To turn the tool on, squeeze the variable speed trigger switch (A). To
turn the tool off, release the variable speed trigger switch.
The trigger switch enables you to start the application at a slow speed.
The further you depress the trigger, the faster the tool will operate.
WARNING: This tool has no provision to lock the switch in the on
position and should never be locked on by any other means.
LOCK-OFF BUTTON
Your saw is equipped with a lock-off button (B).
To lock the trigger switch (A), press the lock-off button as shown in
Figure 3. When the lock-off button is depressed to the lock icon, the
tool is locked. Always lock the trigger switch when carrying or storing
the tool to eliminate unintentional starting.
NOTICE: Use of very slow speed is recommended only for beginning
a cut. Prolonged use at very slow speed may damage your saw.
FIG. 3
UNLOCKED
9
LOCKED
B