Glacier bay HD58303-2401 Guide D'utilisation Et D'entretien page 4

Installation
1
Preparing for installation
□
Remove the existing showerhead
(counterclockwise) with a wrench.
□
Clean the shower arm thread.
3
Installing the hose
Attach the handshower hose to the 1/2 in. outlet
□
on the shower arm mount.
B
5
Finishing the installation
□
Turn on the water supply, check for leaks, and
tighten as needed.
C
2
Installing the shower arm mount
□ Apply the new thread sealant tape to the shower
arm.
□
Hand-tighten the shower arm mount (B) (clockwise)
onto the shower arm.
B
4
Installing the handshower
□
Attach the other end of the handshower hose (C)
to the handshower (A).
4
D
A
C