RCA 32F650T Mode D'emploi page 19

4. Choose which channel you want to set:
Set VCR1 The channel the TV tunes to when you press the VCR button.
Set VCR2 Not available with your remote control.
Set SAT/CABLE The channel the TV tunes to when you press the SAT•CAB
button.
Set DVD The channel the TV tunes to when you press the DVD button.
5. Press the right arrow button to select the choice that matches the way you
have the component connected to this TV.
The choices and a brief explanation follow:
AUTO TUNING
Go Back
Set VCR1 VID1 . . .
VID1 . . .
Set VCR2
CH02 . . .
Set SAT/CABLE
CH03 . . .
Set DVD
Chapter 3
Graphics contained within this publication are for representation only.
Using the TV's Features
N/A Choose this if you don't have this particular component
connected to the TV, or if you don't want the TV to
automatically tune to the correct channel when you're using
this component.
CH02 (SAT/CABLE only) Component is connected to the TV
ANT jack on the back of the TV, and you want the TV to tune
to channel 2 when you press the SAT•CAB button on the
remote. Reminder: make sure the component's Channel 2/3/4
switch is set to channel 2. Usually this switch is on the back
of the component.
CH03 or 04 Component is connected to the TV ANT jack on
the back of the TV, and you want the TV to tune to channel 3
or 4 when you press the corresponding button on the
remote. Reminder: make sure the component's Channel 3/4
switch is set to the appropriate channel.
VID1 Component is connected to the VIDEO 1 VIDEO or
S-VIDEO IN jack on the back of the TV and you want the TV
to tune to a video input channel when you press the
corresponding button.
VID2 Component is connected to the VIDEO 2 VIDEO or
Y, Pb, Pr jacks on the back of the TV and you want the TV to
tune to a video or component video input channel when you
press the corresponding button.
VID3 Compatible component video source, such as a DVD
player or digital TV converter box, is connected to the
VIDEO 3 Y, Pb, Pr jacks on the back of the TV and you want
the TV to tune to the component video input channel when
you press the corresponding button.
FRNT (Front Video Input) Component is connected to the
VIDEO jack on the front of the TV and you want the TV to
tune to the front video input channel when you press the
corresponding button.
17