Toro Recyler Mode D'emploi page 10

Product Overview
1. Handle
2. Traction-assist handle
3. Blade-control bar
4. Adjustment knob for the
self-propel drive
5. Fuel-tank cap
6. Air filter
7. Spark-plug wire
Figure 12
1. Grass bag
Figure 11
8. Belt cover
9. Side-discharge door
10. Cutting-height lever (4)
11. Bag-on-demand lever
12. Handle knob (2)
13. Oil fill/dipstick
14. Recoil-start handle
g027237
2. Side-discharge chute
Operation
Before Operation
Before Operation Safety
General Safety
•
Become familiar with the safe operation of the equipment,
operator controls, and safety signs.
•
Check that all guards and safety devices, such as doors
and/or grass catchers, are in place and working properly.
•
Always inspect the machine to ensure that the blades,
blade bolts, and cutting assembly are not worn or
damaged.
•
Inspect the area where you will use the machine and
remove all objects that the machine could throw.
•
Adjusting the cutting height may bring you into contact
with the moving blade, causing serious injury.
– Shut off the engine and wait for all moving parts to
stop.
– Do not put your fingers under the housing when
g038584
adjusting the cutting height.
Fuel Safety
DANGER
Fuel is extremely flammable and highly explosive.
A fire or explosion from fuel can burn you and
others and can damage property.
• To prevent a static charge from igniting the fuel,
place the container and/or machine directly on
the ground before filling, not in a vehicle or on
an object.
• Fill the fuel tank outdoors, in an open area, when
the engine is cold. Wipe up any fuel that spills.
• Do not handle fuel when smoking or around an
open flame or sparks.
g027237
• Store fuel in an approved container and keep it
out of the reach of children.
WARNING
Fuel is harmful or fatal if swallowed. Long-term
exposure to vapors can cause serious injury and
illness.
• Avoid prolonged breathing of vapors.
• Keep your hands and face away from the nozzle
and the fuel-tank opening.
• Keep fuel away from your eyes and skin.
8