Publicité
Les langues disponibles
Les langues disponibles
COOKTOP
Displayed code
Possible cause
This code occurs if communication
between the Main and Inverter PBA
is interrupted.
The top sensor is open when the
burner is operating.
The top sensor is short when the
burner is operating.
The IGBT sensor is open when the
burner is operating.
The IGBT sensor is short when the
burner is operating.
This code occurs if the DC fan motor
is open or locked.
NE63B8611-03_IB(FULL)_EN+MES+CFR.indb 63
NE63B8611-03_IB(FULL)_EN+MES+CFR.indb 63
Displayed code
Solution
Turn the knob to Off,
and then turn it to the
setting you want again.
If the problem persists,
disconnect all power to
the range for at least
30 seconds and then
reconnect the power.
If this does not solve
the problem, call for
service.
Call for service
Possible cause
Displayed if the cookware on an
element is unsuitable or too small
Check the cookware
or no cookware has been placed on
the cooking zone.
Displayed if an element knob was
set to an On position when the
To return the display
Sabbath or Self-clean mode has
to normal and use the
ended or been cancelled, and the
cooktop, turn the knob
burner was not able to detect pan
to the Off position.
during 30 seconds.
Turn the knob to Off,
and then turn it to the
setting you want again.
If the problem persists,
This code appears if the internal
disconnect all power to
temperature of a burner rises
the range for at least
abnormally high.
30 seconds and then
reconnect the power.
If this does not solve
the problem, call for
service.
Solution
English 63
2023-10-13 오후 2:14:20
2023-10-13 오후 2:14:20
Publicité
